Measurement Computing ADAC-LVi - Manual (Page 170)

Chapter 2 IRQ (Interrupt) Config Library
ADAC LabVIEW VI 164
$'$& 6HW ,54 /HYHO FRQ¶W
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.
ADAC Get IRQ Level
This VI gets the hardware IRQ level of the device. See the AL_SetIrqLevel.VI for the
available options.
Device Handle (0) Device Handle is a numeric value that is used to identify the device
subsystem. The default Device Handle is 0.
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.
IRQ LEVEL IRQ LEVEL is a numeric value that represents the hardware IRQ level
currently set in the device. The available options are:
0:DISABLED IRQ disabled
1:DISABLED IRQ disabled
2:IRQ2 IRQ level 2
3:IRQ3 IRQ level 3
4:IRQ4 IRQ level 4