Measurement Computing ADAC-LVi - Manual (Page 146)

Chapter 2 Digital I/O Library
ADAC LabVIEW VI 140
$'$& 6HW 3RUW 5HV FRQ¶W
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.
ADAC Set Port Mask
This VI specifies the input or output bit(s) that are to be acted upon during Interrupt or
DMA transfers.
Device Handle (0) Device Handle is a numeric value that is used to identify the device
subsystem. The default Device Handle is 0.
Port Mask (b11111111) Port Mask is a binary value that selects the operation bits. All
bits set to one (1) in the Port Mask will acted upon during Interrupt or DMA transfers.
The default value is binary 11111111.
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.