Comtech EF Data SNM-1000 - Manual (Page 98)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–56
3.7.7 Transmitter On (RF_ON)
This command enables the SNM-1000 transmitter.
3.7.7.1 Command Format
RF_ON'cr'
3.7.7.2 Local Command Responses
None.
3.7.8 Transmitter Off (RF_OFF)
This command disables the SNM-1000 transmitter.
3.7.8.1 Command Format
RF_OFF'cr'
3.7.8.2 Local Command Responses
None.
3.7.9 Transmit Power (TX)
This command sets the SNM-1000 transmit power.
3.7.9.1 Command Format
TX 'cr'
In the range of +5 to -30 dBm, in 0.1 dBm steps.
The format for TX_power is [+] XX.X with an implied minus sign.
3.7.9.2 Local Command Responses
transmit power =