Comtech EF Data SNM-1000 - Manual (Page 116)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–74
3.7.26 Send message to Multipoint Data Circuit Listener (ML)
Changes the return channel for a multipoint data call.
3.7.26.1 Command Format
ML 'cr'
Prefix channel number.
Valid range: 1 through 30.
1 through 30 are for traffic modems attached to an SNM-1000, operating in
external traffic mode.
ML Send message to specified listener
Destination data channel address (phone number).
Max. length: 32 characters.
Valid characters: '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '*', '#', 'A', 'B', 'C', 'D', '-',
'(' or ')'
Note: The '-' and '('or')' characters are not part of the number and are used to
increase readability. They are stripped out and not passed to the NMS.
Message
Max. length: 13 characters..
3.7.26.2 Local Command Responses
Command received OK, will be sent to the NMS.
Error :
Code Description
9 Channel Invalid.
20 Not enought parameters.
3.7.27 Port Redirection
The operation of the User Port may be switched to the Service Port mode. The Service
Port operation contains information to be used for debugging purposes. To redirect the
User Port to the Service Port type:
'!'