Comtech EF Data SNM-1000 - Manual (Page 72)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–30
3.4.5.1 UTILITY:MODULATOR
UTILITY
MODULATOR
3.4.5.1.1 MODULATOR: ASSIGN TRANSMIT FILTERS
ASSIGN
TRANSMIT FILTERS
Transmit code rate/type as follows:
TX-A QPSK 1/2 19.200 kbps
TX-B QPSK 1/2 19.200 kbps
TX-C QPSK 1/2 19.200 kbps
TX-D QPSK 1/2 19.200 kbps
TX-V QPSK 1/2 19.200 kbps
Upon entry, the current transmitter rate is displayed.
3.4.5.1.2 MODULATOR:MOD POWER OFFSET
MODEM POWER OFFSET
+ 0.0 DB
Modulator power offset adjust. Offsets the modulator output power readout in the
Configuration menu. This feature does not actually change the modulator power level, but
displays an offset value in the monitor.
The modulator power offset range is -99.9 to +99.9 dB, in 0.1 dB steps.
Note: Anything except 0.0 dB will cause ADJ to be displayed for the TX power level.