Comtech EF Data SNM-1000 - Manual (Page 85)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–43
3.4.5.5.13 SYSTEM:FPGA FIRMWARE
FPGA FIRWARE
FW/NNNNNN-DDR
Displays the FPGA module firmware version.
The display includes the month, day, and year
3.4.5.5.14 SYSTEM:EXT AGC: MAX PWR
EXT AGC: MAX PWR
0.0 VOLTS
Sets the AGC voltage for a receive signal level of -60.0 dBm. The voltage range is 0.0 to
10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [
↑] or [↓] to
increment or decrement the AGC voltage level in 0.5V steps. Press [ENTER] to execute the
change.
Note: For any receive signal level between -25.0 and -60.0 dBm, the software will
interpolate the required AGC voltage.
3.4.5.5.15 SYSTEM:EXT AGC: MIN PWR
EXT AGC: MIN PWR
10.0 VOLTS
Sets the AGC voltage for a receive signal level of -25.0 dBm. The voltage range is 0.0 to
10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [
↑] or [↓] to
increment or decrement the AGC voltage level in 0.5V steps. Press [ENTER] to execute the
change.
Note: For any receive signal level between -25.0 and -60.0 dBm, the software will
interpolate the required AGC voltage.