Comtech EF Data SNM-1000 User Manual
Page 176
SNM-1000 Node Control Modem
Revision 3
Remote Control Operation
MN/SNM1000.IOM
A–28
or
BCSF_
poll.
Where: the x character is defined as follows:
@
= no change since last BCS_ and BCSF_ polls.
A = BCS_ response has changed since last BCS_ poll.
B = BCSF_ response has changed since last BCSF_ poll.
C = Both responses have changed since last BCS_ and
BCSF_ polls.
Equipment
Type
Command:
Response:
ET_tttttttt_xxx.yyy.zzz'cr''lf']
This command returns the equipment type and the software
version of the addressed device.
Where:
tttttttt = Equipment type.
xxx.yyy.zzz = Software version.
Modem
Monitor and
Contro
Firmware
Information
Command:
Response:
VER_xxx.yyy.zzz'cr'
FW/nnnnnn-ddr'cr'
mm/dd/yy'cr''lf']
Where:
xxx.yyy.zzz = Software version number (0.0.0 to
999.999.999).
nnnnnn = Firmware number (0 to 999999).
dd = Firmware dash number (0 to 99).
r = Firmware revision (-, or A to Z).
Modem Data
ROM
Firmware
Information
Command:
Response:
DSP_FW/nnnnnn-ddr'cr'
DSP_mm/dd/yy'cr'
FPGA_FW/nnnnnn-ddr'cr'
FPGA_mm/dd/yy'cr''lf']
Where:
nnnnnn = Firmware number (0 to 999999).
dd = Firmware dash number (0 to 99).
r = Firmware revision (-, or A to Z).