Comtech EF Data SNM-1000 - Manual (Page 49)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–7
3.4.1.1.2 MODULATOR:TX-IF FREQENCY
TX-IF FREQUENCY
70.000000 MHz
Displays the modulator TX IF frequency between 50 and 180 MHz, in 1 Hz steps.
Upon entry, the current transmitter frequency is displayed with the flashing cursor on the
first character. Press [
← ] or [→] to move the flashing cursor, and [↑ ] or [↓ ] to increase
or decrease the digit at the flashing cursor. Press to execute the change.
3.4.1.1.3 MODULATOR:TX-IF OUTPUT
TX-IF OUTPUT
ON
Displays the modulator output status, either On or Off.
3.4.1.1.4 MODULATOR:TX POWER LEVEL
TX POWER LEVEL
-20.0 dBm
Displays the modulator output level from:
• -5.0 to –30.0 dBm (Normal Range)
Upon entry, the current output power level is displayed with the flashing cursor on the
first character. Press [
← ] or [→] to move the flashing cursor, and [↑ ] or [↓ ] to increase
or decrease the digit at the flashing cursor. Press to execute the change.