Comtech EF Data SNM-1000 - Manual (Page 117)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–75
3.7.28 Debugging with the User Port
Debug messages at the user/service port can be enabled and disabled.
3.7.28.1 Command Format
DEB
Example:
User Port > DEB
DAC debug commands:
1: SYS debug 2: MSG debug 3: ROUTER debug
4: HDLC debug 5: C/SDAC debug 6: MODEM debug
7: DICA debug 8: VFDU debug 9: DTCP debug
User Port >
3.7.28.2 Initiate Modem Command Debug
Enter “DEB 6” to display the Modem debug submenus:
User Port > DEB 6
MODEM debug:
1:sdmMsg=0, 2:mcpMsg=0,
User Port >
To enable l:sdmMsg, enter “DEB 6 1 1.”
User Port > DEB 6 1 1
MODEM debug:
1:sdmMsg=1, 2:mcpMsg=0,
User Port >
IMPORTANT
Notice that sdmMsg=1 (enabled). The redirection command described
in Section 3.2.27 can be used to toggle the display of messages On or
Off.