Comtech EF Data SNM-1000 - Manual (Page 80)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–38
3.4.5.3.9 INTERFACE:RX DATA PHASE
RX DATA PHASE
NORMAL
RX data phase relationship. Use this option to select NORMAL or INVERT for the RX
data relationship to the selected RX clock.
Upon entry, press [
↑] or [↓] to make the selection. Press [ENTER] to execute the change.
3.4.5.3.10 INTERFACE:CTS DELAY
CTS DELAY
X SECONDS
Sets the delay in seconds (0 to 60) for the Clear To Send (CTS) signal.
Default: 0 Seconds.
3.4.5.4 UTILITY:NETWORK
SNM 1000
NA 2000
3.4.5.4.1 NETWORK:RELEASE
SNM 1000
REL 4.X.X
Status only.
Shows installed version of DAC code and code’s CRC in hexadecimal.
e.g. rel 4.3.0 p cc14