Comtech EF Data SNM-1000 - Manual (Page 87)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–45
3.4.5.6 UTILITY:MODEM TYPE
UTILITY
MODEM TYPE
3.4.5.6.1 MODEM TYPE:MODEM TYPE
MODEM TYPE
CUSTOM
Selects the following types of modem operation:
• CUSTOM
Selections are made from the Front Panel menu
• EFD
Closed Network Operation
When the modem is changed from one type of operation to another, the modem will be
reset to the default configurations of the new modem type. The RF-IF Output must be
turned on to get the modem to lock.
• If the existing modem type is the same as the type entered, the modem will not
change any parameters.
• If the modem type is changed to Custom, no parameters will be changed.
• If the modem will not allow the modem type selection, that type of operation
may not be an available option.
• Select MODEM OPTIONS and OVERHEAD OPTIONS to see which modem
operations are allowed.
Note: D&I is designed to work with the G.703 interface only.