Comtech EF Data SNM-1000 - Manual (Page 111)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–69
3.7.21 Add Multipoint Data Circuit (MA)
Adds another circuit to multipoint data call, NMS reports results of call using CS
unsolicited response.
3.7.21.1 Command Format
MA'cr'
Prefix channel number.
Valid range: 1 through 30.
1 through 30 are for traffic modems attached to an SNM-1000, operating in
external traffic mode.
MA Add MultiPoint Data Call
Destination data channel address (phone number).
Max. length: 32 characters.
Valid characters: '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '*', '#', 'A', 'B', 'C', 'D', '-',
'(' or ')'
Note: The '-' and '('or')' characters are not part of the number and are used to
increase readability. They are stripped out and not passed to the NMS.
3.7.21.2 Local Command Responses
Command received OK, will be sent to the NMS.
Error :
Code Description
9 Channel Invalid.
20 Not enought parameters.
21 Bad circuit number.