Comtech EF Data SNM-1000 - Manual (Page 112)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–70
3.7.22 Drop Multipoint Data Circuit (MT)
Drops circuit from multipoint data call, NMS will respond with a CS response to both the
called and the calling nodes.
3.7.22.1 Command Format
MT'cr'
Prefix channel number.
Valid range: 1 through 30.
1 through 30 are for traffic modems attached to an SNM-1000, operating in
external traffic mode.
MT Drop MultiPoint Data Call
Destination data channel address (phone number).
Max. length: 32 characters.
Valid characters: '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '*', '#', 'A', 'B', 'C', 'D', '-',
'(' or ')'
Note: The '-' and '('or')' characters are not part of the number and are used to
increase readability. They are stripped out and not passed to the NMS.
3.7.22.2 Local Command Responses
Command received OK, will be sent to the NMS.
Error :
Code Description
9 Channel Invalid.
20 Not enought parameters.
21 Bad circuit number.