Altera Stratix IV GX FPGA Development Board - Manual (Page 74)

2–66 Chapter 2: Board Components
Statement of China-RoHS Compliance
Stratix IV GX FPGA Development Board August 2012 Altera Corporation
Reference Manual
f
For more information on the development board installation directory, refer to the
Stratix IV GX FPGA Development Kit User Guide .
The remote sense routes to the FPGA diode pins to measure the voltage drop. For
very accurate temperature readings, the I/O adjacent to the FPGA diode sense pins
must be halted.
Table 2–60 lists the temperature sense interface pin assignments, signal names, and
functions.
Table 2–61 lists the temperature sense component reference and manufacturing
information.
Statement of China-RoHS Compliance
Table 2–62 lists hazardous substances included with the kit.
Table 2–60. Temperature Sense Pin Assignments, Schematic Signal Names, and Functions
Board
Reference
Description Schematic Signal
Name
I/O Standard
MAX II CPLD EPM2210
System Controller
Pin Number
Stratix IV GX
Device
Pin Number
U27.14 SMB clock SENSE_SMB_CLK 2.5-V R1 W34
U27.12 SMB data SENSE_SMB_DATA 2.5-V R4 AH32
U27.9
Programmable
over-temperature
OVERTEMPn 2.5-V P5 —
U27.11 Programmable alert TSENSE_ALERTn 2.5-V M2 —
Table 2–61. Temperature Sense Component Reference and Manufacturing Information
Board Reference Description Manufacturer
Manufacturing
Part Number
Manufacturer
Website
U26
Temperature sense, remote and
local, programmable alert.
Maxim MAX1619MEE+T www.maxim-ic.com
Table 2–62. Table of Hazardous Substances’ Name and Concentration Notes (1) , (2)
Part Name
Lead
(Pb)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr6+)
Mercury
(Hg)
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl Ethers
(PBDE)
Stratix IV GX development
board
X* 0 0 0 0 0
12 V power supply 0 0 0 0 0 0
Type A-B USB cable 0 0 0 0 0 0
User guide 0 0 0 0 0 0
Notes to Table 2–62 :
(1) 0 indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the
SJ/T11363-2006 standard.
(2) X* indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant
threshold of the SJ/T11363-2006 standard, but it is exempted by EU RoHS.