Altera Arria V GT FPGA Development Board - Manual (Page 78)

2–68 Chapter 2: Board Components
Power Supply
Arria V GT FPGA Development Board December 2014 Altera Corporation
Reference Manual
Power Supply
A laptop style DC power input provides power to the development board. The input
voltage must be in the range of 14 V to 20 V. The DC voltage is then stepped down to
various power rails used by the board components and installed into the HSMC
connectors.
An on-board multi-channel analog-to-digital converter (ADC) measures both the
voltage and current for several specific board rails. The power utilization is displayed
on a graphical user interface (GUI) that can graph power consumption versus time.
C8 FM_A21 AT29 1.8-V Address bus
A8 FM_A22 AU29 1.8-V Address bus
G1 FM_A23 AP30 1.8-V Address bus
H8 FM_A24 AN29 1.8-V Address bus
B6 FM_A25 AL32 1.8-V Address bus
B8 FM_A26 AK31 1.8-V Address bus
F2 FM_D0 AC22 1.8-V Data bus
E2 FM_D1 AH20 1.8-V Data bus
G3 FM_D2 AG22 1.8-V Data bus
E4 FM_D3 AN20 1.8-V Data bus
E5 FM_D4 AP20 1.8-V Data bus
G5 FM_D5 AV22 1.8-V Data bus
G6 FM_D6 AG23 1.8-V Data bus
H7 FM_D7 AN22 1.8-V Data bus
E1 FM_D8 AH21 1.8-V Data bus
E3 FM_D9 AD21 1.8-V Data bus
F3 FM_D10 AN23 1.8-V Data bus
F4 FM_D11 AM21 1.8-V Data bus
F5 FM_D12 AL22 1.8-V Data bus
H5 FM_D13 AG20 1.8-V Data bus
G7 FM_D14 AK22 1.8-V Data bus
E7 FM_D15 AK23 1.8-V Data bus
Table 2–35. Flash Pin Assignments, Schematic Signal Names, and Functions (Part 2 of 2)
Board
Reference (U4)
Schematic
Signal Name
Arria V GT FPGA
Pin Number
I/O Standard Description