Altera Arria V GT FPGA Development Board - Manual (Page 11)

December 2014 Altera Corporation Arria V GT FPGA Development Board
Reference Manual
2. Board Components
Introduction
This chapter introduces the major components on the Arria V GT FPGA development
board.
Figure 2–1 illustrates the component locations and Table 2–1 provides a brief
description of all component features of the board.
1 A complete set of schematics, a physical layout database, and GERBER files for the
development board reside in the Arria V GT FPGA development kit documents
directory.
f For information about powering up the board and installing the demonstration
software, refer to the
Arria V GT FPGA Development Kit User Guide .
This chapter consists of the following sections:
■ “Board Overview”
■ “Featured Device: Arria V GT FPGA” on page 2–6
■ “MAX II CPLD EPM2210 System Controller” on page 2–8
■ “Configuration, Status, and Setup Elements” on page 2–14
■ “Clock Circuitry” on page 2–22
■ “General User Input/Output” on page 2–27
■ “Components and Interfaces” on page 2–33
■ “Memory” on page 2–54
■ “Power Supply” on page 2–68
■ “Statement of China-RoHS Compliance” on page 2–72