Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 82)

Page 81
286. Fill the intercooler reservoir with green
ethylene glycol. Screw on the pressure cap
supplied in the E-Force kit.
NOTE: The aftermarket coil covers are optional
with this kit.
287. Install the coil cover mounts on both sides
of the engine as shown. The OEM coil mounting
bolts are used to mount the new coil cover
brackets. Torque the bolts to 89 in-lbs.
288. Using a 6mm Allen key socket and
ratchet, mount the coil cover using the four (4)
supplied M8-1.25 X 20mm socket head cap
screws as shown. Apply Loctite® to the threading
of each bolt. Repeat this step for each side.
289. Remove the four (4) bolts holding the
hood hinges to the OEM hood. There are two (2)
per hinge. Re-Install the hood hinges on to the
aftermarket hood using the OEM bolts.