Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 72)

Page 71
246. Re-install the positive charging wire on to
the alternator. Using a 13mm socket, tighten the
nut on to the battery cable stud. Torque the nut
to 15 ft-lbs.
247. Install the loom onto the braided fuel line
hose. Plug the hose into the U-shaped fitting on
the driver-side fuel rail.
248. Install the factory safety clips onto both
ends of the braided hose that connects to the fuel
feed line. Make sure to secure the fuel line so
that it is not in contact with anything that the fuel
could react to.
249. Using the 16mm socket for the tensioner,
install the supplied serpentine belt, following the
adjacent routing illustration.