Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 44)

Page 43
135. Remove the shield from the stock lower
radiator hose and install it on the supplied lower
radiator hose. Install the new lower radiator hose
with the OEM clamps.
136. Depress the lock tab and disconnect
the vacuum side (forward) hose of the EVAP
solenoid. The solenoid is located below the
driver side fuel rail test port and attached to the
intake manifold assembly, which was removed
and set aside in step 44.
137. Depress the lock tab and disconnect the
tank side (rear) hose of the EVAP solenoid.
138. Using a screwdriver, pry the locking tab
open and slide the EVAP solenoid up off of the
bracket.
Caution: Take care not to break the plastic tabs
on the EVAP solenoid.