Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 69)

Page 68
234. Using a 3/16” Allen socket, remove the
pipe plug from the side of the supercharger and
save.
235. Apply Teflon Sealer on to the male fitting of
the supplied stainless steel pipe “T” and install in
to the supercharger.
236. Re-install the pipe plug removed in step
236 into the rear fitting of the pipe “T”
NOTE: The rear fitting is where a nipple would
be installed if a boost/vacuum gauge was to be
installed.
237. With a 1-1/16 inch sender socket, install
the pressure switch included in the Boost-A-
Pump kit into the “T” fitting.