Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 76)

Page 75
262. Slip the LPE supplied hose (PN: XX04468-
0022) onto the throttle body. The hose is taper
cut, so make sure the flat side of the hose is on
the throttle body with the shortest side up.
263. Install the air intake spacers
(PN: XX04468-0002) over the studs on the
radiator support.
264. Route the MAF wiring to the inside of the
driver-side stud.
265. Install the air inlet tube onto the hose on
the throttle body and slide down onto the studs.