Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 31)

Page 30
83. While using a #40 Torx socket to hold the
end link stud, use an 18mm wrench to remove
the nut and to disconnect the sway bar end link.
Use the same process on the other side of the
vehicle.
84. Using the 13mm socket and ratchet,
remove the two (2) anti-sway bar retaining
brackets. Use the same process on the other
side of the vehicle.
85. Using an 18mm socket and ratchet,
remove the two (2) motor mount nuts. These
nuts are located just forward of the engine oil
sump pan.
86. Loosen, but do not remove the four (4)
front sub frame nuts. The nut should only be on
the stud by a couple threads.