Echelon i.LON SmartServer 2.0 - Manual (Page 98)

i.LON SmartServer 2.0 Programmer’s Reference 7-6
255
Online
LonFormat="UCPTalarmCondition">AL_NO_CONDITION
0
Mail[UCPTnickName=“Alarm
Notification “]
DataPoint[@dpType=“Output” and UCPTnickName=“Net/LON/iLON App/
Data Logger[0]/nviDlClear[0]”]
ON
255
0
0
255
0
0
The function returns an element for each Alarm Notifier referenced in the input parameters
supplied to the function. The properties included in each element are initially defined when the Alarm
Notifier is created. You can write to these properties with the Set function. The following table
describes these properties.
Property Description
The name of the Alarm Notifier in the following format:
<network/channel/device/functional block>.
The program ID and functional profile template used by the
Alarm Notifier. This property is always
8000010128000000[4].UFPTalarmNotifier
A flag indicating whether the Alarm Notifier functional
block is hidden or shown in the navigation pane on the left
side of the SmartServer Web interface. This property may
have the following values:
0 – shown
1 – hidden
This property only appears if the data logger is not
synchronized with an LNS network database or it has been
deleted. In this case, it has the following values:
IS_NOTSYNCED
IS_DELETED
A timestamp indicating the last time the configuration of the
Alarm Notifier was updated. This timestamp uses the
following format:
[YYYY-MM-DD]T[HH:MM:SS.sss]+/-[
HH:MM]