Echelon i.LON SmartServer 2.0 - Manual (Page 122)

i.LON SmartServer 2.0 Programmer’s Reference 8-4
Net/LON/iLON App/Digital Input 1/nvoClsValue_1
value
LonFormat="UCPTcompFunction">FN_NUL
100
LonFormat="UNVT_float" />
LonFormat="UCPToutputFunction">FN_AVERAGE
LonFormat="#0000000000000000[0].SNVT_switch.value">0
LonFormat="#0000000000000000[0].SNVT_switch.value">100
0.0
1
LonFormat="SCPTovrBehave">OV_RETAIN
0.0
The function returns an element for each Analog Functional Block referenced in the input
parameters supplied to the function. The properties included in each element are initially defined when
the Analog Functional Block is created. You can write to these properties with the Set function. The
following table describes these properties.
Property Description
The name of the Analog Functional Block in the following
format: <network/channel/device/functional block>.
The program ID and functional profile template used by the
Analog Functional Block. This property is always
8000010128000000[4].UFPTanalogFunctionBlock
.
A flag indicating whether the Analog Functional Block
functional block is hidden or shown in the navigation pane
on the left side of the SmartServer Web interface. This
property may have the following values:
0 – shown
1 – hidden
This property only appears if the data logger is not
synchronized with an LNS network database or it has been
deleted. In this case, it has the following values:
IS_NOTSYNCED
IS_DELETED
A timestamp indicating the last time the configuration of the
Analog Functional Block was updated. This timestamp uses
the following format:
YYYY-MM-DDTHH:MM:SSZ
The name of the file containing the configuration web page
for the Analog Functional Block on the SmartServer flash
disk, absolute or relative to /web/user/echelon. This
property is
#8000010128000000[4].UFPTanalogFunctionBlock
_Cfg by default.
You can specify as many input data points as you want per