5 real time system information, Real-time system information -9 – Echelon i.LON SmartServer 2.0 User Manual
Page 309
i.LON SmartServer 2.0 Programmer’s Reference
19-9
Property Description
R/W
used to accommodate block failures.
The recommended minimum number of spare flash
blocks (8 blocks). If a flash block on the SmartServer
fails and there are no spare blocks remaining, the flash
disk may become unreliable. The SmartServer should
be replaced before this happens.
r
The maximum rate of erases/minute of the
SmartServer flash disk.
r
This property specifies whether a SmartServer
Programming Activation Key is installed on the
SmartServer. This property may be one of the
following values:
• PS_REGISTERED
• PS_ UNREGISTERED
A SmartServer Programming Activation Key must be
installed on a SmartServer in order to deploy freely
programmable modules (FPMs) on it. For more
information on creating and deploying FPMs, see the
i.LON SmartServer Programming Tools User’s Guide.
r
19.1.5
Real-Time System Information
You can use the SystemService_Read_Info function to get general network performance statistics for
the SmartServer, including the current flash memory usage, CPU utilization, data point message
failures, and the time of last Web browser refresh. To do this, you provide the
SystemService_Read_Info function with an
Request
Response
0
0
0