Echelon i.LON SmartServer 2.0 - Manual (Page 283)

i.LON SmartServer 2.0 Programmer’s Reference 16-16
16.4.4 Using the Delete Function on M-Bus Data Points
You can use the Delete function to delete an M-Bus data point on the SmartServer. The Delete
function takes an element with an MBS_Dp_Cfg type as its input. The element only
needs to include the M-Bus data point’s property in the Delete Request as demonstrated
in the following code sample:
Request
xsi:type="MBS_Dp_Cfg">
Net/M-Bus Channel/M-Bus Device/VirtFb/MBS3
Response
0
Net/M-Bus
Channel/M-Bus Device/VirtFb/MBS3