Echelon i.LON SmartServer 2.0 - Manual (Page 308)

i.LON SmartServer 2.0 Programmer’s Reference 19-8
true
true
4.01.112
TP_FT_10
4.01.012
74
3
3 0 0 19 7b 80
94
8
78
PS_REGISTERED
false
The SystemService_Read_Info function returns one item. The following table lists and
describes the properties of the item. Note that all of the item’s properties are
read-only.
Property Description R/W
A timestamp indicating the time that the static system
information was returned. This timestamp uses the
ISO 8601 format, which is as follows:
YYYY-MM-DDTHH:MM:SS.sssZPhh:mm
r
The CPU speed (in MHz) of the SmartServer. r
The total disk space available on the SmartServer (in
bytes). The SmartServer hardware has a 64MB flash
disk. r
The SmartServer's model number. r
A flag indicating whether the SmartServer has an
internal modem. r
A flag indicating whether IP-852 routing is licensed
on the SmartServer. r
The bootrom version of the SmartServer. r
The channel type of the SmartServer. For free
topology models of the SmartServer, this is
TP_FT_10. For power line models, this is PL_20N
(or PL-20C if CENELEC is enabled). r
The firmware version of the SmartServer. r
The CPLD version. r
The first of the SmartServer’s 16 Neuron IDs. r
The total number of spare flash blocks initially
available on the SmartServer. The SmartServer
hardware contains up to 94 spare flash blocks that are r