Echelon i.LON SmartServer 2.0 - Manual (Page 306)

i.LON SmartServer 2.0 Programmer’s Reference 19-6
Response
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
/>
Not Available
1
1
1
1
ilon
/>
1
1
1
80
21
23
1
/>
/>
The SystemService_Read_Info function returns one item. The following table lists and
describes the properties of the item. You can use the SystemService_Write_Info function to
configure those properties that are marked (r/w). Properties that are read-only are marked (r).
Property Description R/W
The MD5 authentication key used for authentication
when using the SmartServer as an RNI. This value
must match the one specified in the L
ON W ORKS
Interfaces control panel application.
r/w
A text secret phase for authentication when using the
SmartServer as an RNI. This can be used instead of
the Raw MD5 authentication key specified by
. r/w
A flag indicating whether the modem is responding to
incoming calls. r
A flag indicating whether the SmartServer console
application can be accessed via Telnet. r/w
A flag indicating whether the SmartServer can be
accessed via FTP. r/w
A flag indicating whether the SmartServer can be used
as an RNI. r/w
The user name used to access the SmartServer via
FTP. The default user name is ilon. You can specify
a different user name, which may be up to 20
characters long and contain letters, numerals, and the
underscore character. r/w