Echelon i.LON SmartServer 2.0 - Manual (Page 181)

i.LON SmartServer 2.0 Programmer’s Reference 12-9
ST_HIGH value: 75.0
state: 1 (ON)
ST_MED value: 50.0
state: 1 (ON)
ST_LOW value: 25.0
state: 1 (ON)
The following code demonstrates how to use the Set function to create a type translator that uses this
:
xsi:type="UFPTtypeTranslator_Cfg">
Net/LON/iLON App/Type Translator[0]
dpType="Input">
Net/LON/iLON App/VirtFb/nvilevDisc
#0000000000000000[0].SNVT_lev_disc
Input0
dpType="Output">
Net/LON/iLON App/VirtFb/nvoSwitch
#0000000000000000[0].SNVT_switch
Output0
SNVT_lev_disc_TO_SNVT_switch
0
12.3.4.4 SNVT_occupancy_TO_SNVT_setting
You can use this Type Translator Rule to translate an input data point of type SNVT_setting to an
output data point of type SNVT_occupancy.
• The SNVT_occupancy input data point is defined by a element that has a
“Dp Type” attribute of “Input”. The input data point referenced by must have a
property of #0000000000000000[0]. SNVT_occupancy and a
property of Input0.
• The SNVT_setting output data point to be translated is defined by a element that
have a “Dp Type” attribute of “Output”. The output data point referenced by must
have a of #0000000000000000[0]. SNVT_setting and a
of Output0.
Each time a type translation is made, the function, rotation, and setting fields of the SNVT_setting
ouput data point are assigned values based on the current enumeration stored in the SNVT_occupancy
input data point, as described in the following table:
SNVT_occupancy (input
point) SNVT_setting (ouput point)
OC_NUL function: SET_STATE (enumerated value is 5)
setting: 0
rotation: 0
OC_UNOCCUPIED function: SET_STATE
setting: 60
rotation: -80.01
OC_OCCUPIED function: SET_STATE
setting: 100
rotation: 80.24