Echelon i.LON SmartServer 2.0 User Manual

Page 82

i.LON SmartServer 2.0 Programmer’s Reference

6-4

2008-02-28T15:45:26.060-08:00
#8000010128000000[4].UFPTalarmGenerator_Cfg.htm

Net/LON/iLON

App/Alarm

Generator[0]/nviAgEnable[0]

Net/LON/iLON

App/Alarm

Generator[0]/nvoAgAlarmFlag[0]

Net/LON/iLON

App/Alarm

Generator[0]/nviAgLatchEnbl[0]

Net/LON/iLON

App/Digital

Output

1/nviClaValue_1

Net/LON/iLON

App/Alarm

Generator[0]/CompareDP

Net/LON/iLON

App/Alarm

Generator[0]/alarm

0.000000

LonFormat="UCPTalarmPriority">PR_LEVEL_1

0.0
0.0

LonFormat="UCPTcompFunction">FN_EQ

0.000000
0.000000

LonFormat="UNVT_double_float">

The function returns an element for each Alarm Generator referenced in the input parameters
supplied to the function. The properties included in each element are initially defined when the Alarm
Generator is created. You can write to these properties with the Set function. The following table
describes these properties.

Property Description

The name of the Alarm Generator in the following format:
<network/channel/device/functional block>.

The program ID and functional profile template used by the
Alarm Generator. This property is always
8000010128000000[4].UFPTalarmGenerator

A flag indicating whether the Alarm Generator functional
block is hidden or shown in the navigation pane on the left
side of the SmartServer Web interface. This property may
have the following values:

– shown

– hidden

This property only appears if the data logger is not
synchronized with an LNS network database or it has been