Echelon i.LON SmartServer 2.0 - Manual (Page 212)

i.LON SmartServer 2.0 Programmer’s Reference 14-12
Net/LON
IP
IP;xsi:type="LON_Channel_Cfg"
1
The List function returns a list of elements for each L ON W ORKS channel defined on the
SmartServer or each L ON W ORKS channel defined in a specific LNS network database.
You could use the list of elements returned by this function as input for the Get function. The
Get function would then return the configuration of each channel included in the list. The next section
describes the properties included in each of these elements.
14.2.2 Using the Get Function on a L
ON
W
ORKS
Channel
You can use the Get function to retrieve the configuration of a L ON W ORKS channel defined on the
SmartServer or a L ON W ORKS channel in a specific LNS network database. The input parameters you
supply to this function will include one or more elements with a LON_Channel_Cfg type.
Each element will include the of each channel whose configuration is to be
returned by this function, as shown in the example below.
Request
xsi:type="LON_Channel_Cfg">
Net/LON
Response
0
xsi:type="LON_Channel_Cfg">
Net/LON
TP;xsi:type="LON_Channel_Cfg"
0
2008-03-20T17:42:54.903-07:00
LON_Channel_Cfg.htm
0
LonFormat="UCPTchannelType">CT_LON
LonFormat="UCPTtransceiverId">TP_FT_10
LonFormat="UCPTtransmitTimer">TT_96
3
4
LonFormat="UCPTchannelMode">AM_ONLINE
LonFormat="UCPTdynamic">DDT_STATIC
The Get function returns an element for each channel referenced in the input parameters you
supplied to the function. The properties included within each element are initially defined
when the channel is added to the SmartServer or LNS network database. You can write to these
channel properties with the Set function. The following table describes these properties.
Property Description
The name of the channel in the following format:
<network/channel>. You can rename a L
ON W ORKS channel by
providing its and specifying the new