Echelon i.LON SmartServer 2.0 - Manual (Page 290)

i.LON SmartServer 2.0 Programmer’s Reference 17-7
Net/Virtual Channel/Virtual Device
Response
0
Net/Virtual Channel/Virtual Device
17.2.4 Using the Delete Function on Virtual Devices
You can use the Delete function to delete a Virtual device on the SmartServer. The Delete function
takes an element with a Virtual_Device_Cfg type as its input. The element only needs
to include the device’s property in the Delete Request as demonstrated in the following
code sample:
Request
Net/Virtual Channel 1/Virtual Device
Response
0
Net/Virtual Channel 1/Virtual Device
17.3 Virtual Functional Blocks
Before you can add data points to a Virtual device, you need to use the Set function to create a virtual
functional block under the Virtual device. This virtual functional block is used to encapsulate the
virtual data points and enable the Virtual driver to adhere to the network hierarchy naming convention.
The Set function takes an element with a Virtual_Fb_Cfg type as its input, as shown in the
example below.
Request (add a virtual functional block to a Virtual device)
xsi:type="Virtual_Fb_Cfg">
Net/Virtual Channel 1/Virtual Device/VirtFb
Response
0
Net/Virtual Channel 1/Virtual Device/VirtFb