2 time settings, Time settings -4 – Echelon i.LON SmartServer 2.0 User Manual
Page 304
i.LON SmartServer 2.0 Programmer’s Reference
19-4
Property Description
R/W
address prior to a reboot.
The SmartServer’s current configured IPv4 mask. This
property does not reflect changes made to the IPv4 mask
prior to a reboot.
r
The SmartServer’s current configured IPv4 gateway.
This property does not reflect changes made to the IPv4
gateway prior to a reboot.
r
If the SmartServer connects to the LAN via a GPRS
modem connection, this is the SmartServer’s IP address
assigned by the provider
r
A flag indicating whether the IP mode used is IPV4 only
(1) or IPV4/IPV6 (0).
r/w
A flag indicating whether IPV6 static configuration is
enabled.
r/w
The SmartServer’s static IPV6 address
r/w
The SmartServer’s static IPV6 gateway address
r/w
The SmartServer’s link local IPV6 address
r
The SmartServer’s router advisement IPV6 address
r
A flag indicating whether acquiring the SmartServer’s
IPv6 address via DHCP is enabled.
r/w
A flag indicating whether acquiring the SmartServer’s
IPv6 DNS server via DHCP is enabled.
r/w
A flag indicating whether acquiring the SmartServer’s
IPv6 DNS server domain via DHCP is enabled.
r/w
The SmartServer’s IPv6 address assigned by the DHCP
server.
r
19.1.2
Time Settings
You can use the SystemService_Read_Info function to get the SmartServer’s real-time clock settings.
To do this, you provide the SystemService_Read_Info function with an
that includes one
Request