Echelon i.LON SmartServer 2.0 - Manual (Page 206)

i.LON SmartServer 2.0 Programmer’s Reference 14-6
SmartServer and get its property. If you don’t specify the of the
current network, you will receive a response message with the following fault structure:
faultType="_error">8
It's not allowed to set more then one network.
Request (using the SmartServer Web service, select an existing LNS network database to which
the SmartServer will automatically be synchronized)
0
xsi:type="LON_Network_Cfg">
MyNewNetwork_1
873906929
MyNewNetwork_1
//WebService[UCPTindex=4]
LonFormat="UCPTlnsSync">SYNC_LNS
LonFormat="UCPTmgmtMode">LCA_ONNET
X.Default.SmartServer_RNI
Note: You need to specify the property with the handle of the current network on the
SmartServer or the response message will return an error.
Request (create a new network using the SmartServer Web service; use the same Set function to
create the LNS network database via the LNS Proxy Web service and automatically synchronize
the SmartServer to it)
MyNewNetwork_1
xsi:type="number">873906929
MyNewNetwork_1
xsi:type="string">//WebService[UCPTindex=4]
SYNC_LNS
LCA_ONNET
X.Default.SmartServer_RNI
Note: You need to specify the property with the handle of the current network on the
SmartServer or the response message will return an error.
Response
0
MyNewNetwork_1
14.1.3.1 Issuing Network Synchronization Commands
You can use the InvokeCmd function to manually synchronize the objects in a L ON W ORKS network to
an LNS network database. If is set to SYNC_NUL (LNS Manual; manual