Echelon i.LON SmartServer 2.0 - Manual (Page 110)

i.LON SmartServer 2.0 Programmer’s Reference 7-18
/>
Net/LON/iLON App/VirtFb/temp_f
Net/LON/iLON App/VirtFb/temp_f
Net/LON/iLON App/Digital Output 1/nviClaValue_1
Net/LON/iLON App/Digital Output 1/nviClaValue_1
Net/LON/iLON App/Digital Output 2/nviClaValue_2
Net/LON/iLON App/Digital Output 2/nviClaValue_2
0
50
100
LF_TEXT
Net/LON/iLON App/Alarm Notifier[0]_Summary.csv
Net/LON/iLON App/Alarm Notifier[0]_History.csv
0
5
240
Alarm
LonFormat="UCPTalarmCondition">AL_ALM_CONDITION
0
255
Online
LonFormat="UCPTalarmCondition">AL_NO_CONDITION
0
xsi:type="string" />
xsi:type="UFPTalarmNotifier_CfgAlarmDestination">
xsi:type="string">DataPoint[@dpType="Output" and
UCPTnickName="Net/LON/iLON App/Digital Output 1/nviClaValue_1"]
ON
255
0
0
xsi:type="UFPTalarmNotifier_CfgAlarmDestination">
xsi:type="string">
DataPoint[@dpType="Output" and UCPTnickName="Net/LON/iLON App/Digital Output
2/nviClaValue_2"]
OFF
255
0
0
7.3.4 Using the Read Function on an Alarm Notifier
Each time an Alarm Notifier causes an alarm notification, it will record an entry for the notification
into its log file. You can use the Read function to retrieve the log entries that an Alarm Notifier has
recorded. You must reference the Alarm Notifier to return log entries for by its in the
input you supply to the function.
The alarm log files are stored in the /root/AlarmLog directory of the SmartServer. These files are
named histlogX, where X represents the index number assigned to the Alarm Notifier when it was