Echelon i.LON SmartServer 2.0 - Manual (Page 303)

i.LON SmartServer 2.0 Programmer’s Reference 19-3
Auto
false
The SystemService_Read_Info function returns one item. The following table lists and
describes the properties of the item. You can use the SystemService_Write_Info
function to configure those properties that are marked (r/w). Properties that are read-only are marked
with an (r).
Property Description R/W
The SmartServer’s configured IPv4 address.
You must reboot the SmartServer to implement changes
made to this property.
r/w
The SmartServer’s configured IPv4 mask.
You must reboot the SmartServer to implement changes
made to this property.
r/w
The SmartServer’s configured IPv4 gateway.
You must reboot the SmartServer to implement changes
made to this property.
r/w
The SmartServer’s first IPv4 DNS server r/w
The SmartServer’s second IPv4 DNS server (fail over) r/w
The SmartServer’s first IPv6 DNS server r/w
The SmartServer’s second IPv6 DNS server (fail over) r/w
The SmartServer’s hostname, which is “SmartServer”
by default. r/w
The SmartServer’s domain suffix r/w
A flag indicating whether IPv4 DHCP is enabled. r/w
nabled> A flag indicating whether acquiring the DNS domain via
DHCP is enabled. r/w
Enabled> A flag indicating whether acquiring the DNS server
address via DHCP enabled. r/w
ed> A flag indicating whether secure access mode is
enabled. r/w
The MAC identification number used for the
SmartServer’s Ethernet port r
The SmartServer’s current configured IPv4 address.
This property does not reflect changes made to the IPv4 r