Delayed send/poli, Delayed polling -6, Polling - retrieving remote documents – Xerox 7042 User Manual
Page 93
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Delayed Send/Poli
Polling - Retrieving Remote Documents
The machine can transmit a document at a programmed time
then receive a document from the same machine. This
transaction is called delayed send/poll.
You can contact only one remote machine using the delayed
send/poll feature; you can not use group or broadcast dialing.
The machine you dial must be ready to be polled.
Use the following procedure to program a delayed send/poll
transaction:
1.
Load the document face-down in the ADF.
2.
Open the access panel.
3.
Press the DELAYED START key and close the access
panel.
4.
Press the REDIAL/t to display SEND/POLL.
5.
Press the START key. The LCD prompts you for the time
to poll.
6.
Enter the time to contact the remote machine. The LCD
prompts you to verify the time.
7.
Verify the time to poll. To change the time, press the
CLEAR key and reenter the time.
8.
Press the START key. The LCD prompts you to dial the
number.
9.
Dial the number for the remote machine.
10. Verify the telephone number. To change the number,
press the CLEAR key and reenter the number or code.
11. Press the START key.
7-7