Xerox 7042 - Manual (Page 111)

Reports
identification — The name or the number of the remote
machine, if programmed.
Page — The number of pages the machine processed in
the transaction.
Time — The length of the communication, in minutes and
seconds.
Code — Communication error code. Refer to the
Maintenance
chapter for a list of the codes.
Job No. — The job number the machine assigned to the
document.
One Touch Dial Directory
The machine can store 18 one-touch telephone numbers. The
One Touch Dial Directory provides the full-program information
for each of the one-touch keys. Refer to the
Programming the
Dial Directory
chapter for information about the full-program
mode.
You can print the report while you are programming a one-touch
key or by scrolling through the reports listed by the REPORT key.
The One Touch Dial List provides the following information:
• No. — The number of the one-touch key, 01 through 18.
• Name — The dial directory name that is associated with
the one-touch key.
• Tel No. — The telephone number in the dial directory.
• Doc. — The resolution setting for the transmission. Refer
to the
Features
chapter for information on the resolution.
• Secure — Whether the security mode is selected.
• Mailbox — Whether the mailbox communication is
selected.
• International — Whether International communication is
selected.
• ECM — Whether ECM communication is selected.
9-5