Xerox 7042 - Manual (Page 28)

Features
• Job number — The machine assigns a job number to
each document to transmit.
• Dialing — Before the machine dials, the LCD displays
PREPARING TO DIAL. When the machine is dialing a
telephone number, the LCD displays DIALING.
• Connecting — When the machine is connecting with a
remote machine, the LCD displays CONNECTING.
• Transmission or reception — After the machine connects
with a remote machine, the LCD displays whether the
machine is transmitting or receiving a document.
• Communication mode — Based on the line quality and
the capabilities of the remote machine, the machine
selects the most efficient mode to transmit data:
ECM modes
ECM
EMMR CCITT Group 3 machines with ECM
CCITT Group 3 machines with ECM and
MMR capabilities
Non-ECM modes
G3 CCITT Group 3 machines without ECM
Page count — The number of confirmed pages the
machine transmitted or received during the current
communication. The LCD displays Pnn in the upper right
corner of the display, where nn is the page number.
ID name or number of the remote machine — if a user
at a remote machine programmed an ID name or number
for that machine, the LCD displays that information.
Communication error code — The result of an error in a
communication. Refer to the
Maintenance
chapter for a
list of the codes.
1-14