Xerox 7042 - Manual (Page 73)

Transmitting
Cancelling a transmission
The machine allows you to cancel a pending transmission or a
transmission in progress. You must know the job number of a
pending transmission to cancel that transmission. Print a
Memory List to identify the job number.
Use the CLEAR key to cancel a transmission from the memory.
If you use the direct send feature, you must use the STOP key to
end the transmission in progress.
Using the CLEAR key cancels a single transaction; repeat the
procedure to cancel multiple transmissions.
Use the following procedure to cancel a group or manual
broadcast transmission. To quit the cancel operation, press the
STOP key.
1. Press the CLEAR key. The LCD displays the first
programmed transaction.
2. Press the REDIAL/1 key to display TRANSMISSION.
3. Press the START key. The LCD prompts you to enter the
job number.
4. Enter the three-digit job number.
5. Press the START key.
Redialing the previous number
The machine stores in the memory the last number that was
dialed. Use the following procedure to transmit a document to
the last number dialed;
1. Load the document face-down in the ADF.
2. If desired, select the resolution and the halftone.
3. If desired, set the page count and press the START key.
4. Press the REDIAL/1“ key.
5-7 7