Programming the machine – Xerox 7042 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Machine
User option conditions
The following table lists the user options In their numeric order.
This Is the order in which they display on the LCD. The table
indicates the conditions and the default value for the options:
Table 3-2: User Options-
Conditions and Default
Values
Number
LCD Message
Conditions
002
Activity report
On (default)
Off
02
Transmission report
On (default)
On error
Off
03
Listen to rings
On (default)
Off
04
Auto answer
On (default)
Off
05
Auto rev in man mode
On (default)
Off
062
Man mode rev delay
2 - 1 2 times
(6
times = default)
07
Resolution default
Standard (default)
Fine
08
Copy resolution
Fine (default)
Standard
Not selected
102
Header print
Within data (default)
Above data
Off
112
Number of redials
0-10
times
(5
= default)
152
Secure transmission
Off (delFault)
On
162
Junk mail eliminator
Off (default)
On
The table does not include numbers that are not used.
This option is not available or may be a service parameter in some countries.
This value does not display unless the option is valid for the country.
The default value can vary based on the country for the location.
3-70