Xerox 7042 - Manual (Page 21)

Features
JOB STATUS
The JOB STATUS key causes the machine to display the status
of a communication that is occurring as a background job. The
message indicates if the machine is dialing, connecting or
communicating with the remote machine. The LCD also displays
the ID of the remote machine, the communication mode, and the
number of pages transmitted or received.
RESOLUTION
The display appears for a set interval then returns to the standby
display. If you press the JOB STATUS key while the machine is
not executing a background communication, the LCD displays
the message NO JOB IN PROGRESS.
The RESOLUTION key selects the scan mode for copying, for
transmitting, or for storing a document in the memory. For a
normal document set the resolution to STANDARD; for a
document with fine details, set the resolution to FINE or SUPER
FINE. Three LEDs on the control panel indicate the resolution.
The resolution can be changed per page during a transaction.
To select the resolution of the first page, press the RESOLUTION
key before you scan the document. To change the mode for
subsequent pages, press the key while a page is scanning.
If you are copying a document and the Copy Resolution user
option (No. 08) is set to a value, you can not use the
RESOLUTION key to override that value. Refer to the
Programming the Machine
chapter for more information on the
user option.
NOTE: If you select the halftone mode, the machine
automatically sets the resolution to FINE.
1-7