Halftone, Copy a document, Print single copies – Xerox 7042 User Manual
Page 33: Halftone -3, Copy a document -3, Print single copies -3, Copying
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Copying
Halftone
Documents can be copied in the halftone mode. When you copy
a normal document, leave the halftone off. To copy photographs
and figures with shading, select the halftone mode. When you
use the halftone mode, the machine automatically selects FINE
for the resolution and applies 64 levels of halftone as it scans the
document.
NOTE:
If the Copy Resolution user option (No. 08) is set to
STANDARD, the machine does not copy in the halftone mode.
If the option is set to FINE or NOT SELECTED, you can set the
halftone and the resolution for each document you copy.
Copy a Document
The machine can be used to print single or multiple copies of a
document.
To print multiple copies, the machine first stores the document in
the memory then prints the copies. If the memory becomes full
and the machine can not store the document, use the procedure
for printing single copies or delete any unnecessary files from
the memory and begin again.
Print single copies
Use the following procedure to make single copies.
1.
Load the document face-down in the ADF.
2.
If desired, set the resolution and the halftone.
NOTE:
If you set the Copy Resolution user option
(No. 08), you can not override the option. If the option is
set to STANDARD, you also can not set the halftone.
3.
Press the COPY key.
2-3