Maintenance procedures – Xerox 7042 User Manual
Page 131
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Maintenance Procedures
Table 10-4:
Communication Error Codes
Information
Code
Model
Descriptions and
Corrective Actions
006
Hardware timeout error.
Begin the operation again.
008
Telephone line error or a
busy signal was detected.
Begin the operation again.
009
The final redial was not
successful. Begin the
operation again.
010
Telephone line error.
Begin the operation again.
014
An error occurred in the
laser printer or scanner.
Begin the procedure again.
015
Receive
The toner is empty or the
drum unit should be
replaced. Check the toner
and the drum unit.
100
G3/Polling
Telephone line error.
Begin the operation again.
101
G3/T ransmit
Telephone line error.
Begin the operation again.
102
G3/Receive
Telephone line error.
Begin the operation again.
103
G3/Polling
Telephone line error.
Begin the operation again.
104
G3
The other party did not
have a document to
transmit when the machine
polled it. Check if the
remote user has a
document for you to poll.
If the table does not list the communication mode, the code applies to any operation.
10-9