Programming the dial directory – Xerox 7042 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Dial Directory
If you use the full-program mode to program a one-touch key,
the following restrictions apply:
•
In a group broadcast, the machine uses the resolution
you set for the group. It does not change to the resolution
you programmed with the one-touch key.
•
The machine ignores the secure mode if you poll the
number using a one-touch key to dial.
Program the one-touch keys
If you are modifying the entry for a one-touch key and press the
STOP key before you press the START key to save the entry, the
machine deletes the new data and retains the current data. If
you are changing the telephone number, you must enter the
complete number, rather than changing a single digit.
Use the following procedure to program the one-touch keys.
1.
Open the access panel.
2.
Press the PROGRAM key. The LCD displays the
message ONE TOUCH DIAL.
3.
Close the access panel and press the START key. The
LCD prompts you to enter or to clear a one-touch key:
ONE TOUCH DIAL
ENTER OT/CLEAR
Press the one-touch key you want to program. The LCD
prompts you to enter the telephone number.
4-4