Xerox 7042 - Manual (Page 63)

Transmitting
This chapter describes how to transmit a document using the
various dialing techniques.
Load a Document
The document input tray holds up to 30 originals. Create a copy
on a copier using bond paper if a document can not feed
through the scanner. Use the copied image to transmit.
Reproduce on bond paper the following types of originals:
Undersized, lightweight, or heavy card stock
Irregularly shaped or damaged pages
Pages that are stapled, pasted up, or bound
Carbon-backed copies
You can load a document that is up to 279 mm (11 in) wide and
1 m (39.37 in) long. If the document length exceeds this default
limit, the LCD displays a document jam. Increase the allowable
length by setting the Document Length user option (No. 22).
Load all documents face-down in the Automatic Document
Feeder (ADF). Adjust the paper guides to the width of the
document so the pages do not skew as they feed through the
scanner. The following figure shows how to load a document:
5-1