Send/poli, Send/poil -4, Polling - retrieving remote documents – Xerox 7042 User Manual
Page 90
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Polling - Retrieving Remote Documents
Send/Poli
The send/poll feature performs two operations, transmit and poll,
in a single operation. The operation allows you to transmit a
document to a remote machine then poll that machine for a
document. This operation is the only polling operation that does
not occur as a background job.
You can use the send/poll function with only one machine at a
time; you can not use group or broadcast dialing. Also, you can
not use a mailbox number with this method of polling.
Use the following procedure to initiate send/poll with a remote
machine that is in the polling standby mode;
1.
Load the document face-down in the ADF.
2.
Select the resolution and the halftone.
3.
Open the access panel.
4.
Press the POLL/STORE FOR POLLING key.
5.
Press the REDIAL/1 key once to display SEND/POLL.
NOTE: If
a
document is stored to be polled, the LCD
prompts you to select features or to dial.
6.
Press the START key. The LCD prompts you to select
additional features or to dial the number.
7.
If desired, set the page count and the secure mode.
8.
Close the access panel and dial the number for the
remote machine. Your machine transmits the document
then retrieves and prints the remote document
automatically.
7-4