Key or the pause, Key to scroll through the options, Programming the machine – Xerox 7042 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Machine
Set tile user options
Use the following procedure to set the user options before using
the machine. Refer to the User Option Conditions and Default
Values table.
1.
Open the access panel.
2.
Press the PROGRAM key.
3.
Press the REDIAL/ key once to display OPTIONS.
4.
Press the START key. The LCD prompts you to enter a
option number.
OPTIONS
OPTION NO.—?
t
5.
Enter the two-digit option number. Refer to the User
Option Conditions and Default Values table for a list of the
option numbers.
NOTE: Instead of entering the two-digit number, you can
press the REDIAL/
1
key or the PAUSE/
4-
key to scroll
through the options.
6.
To change the option value that the LCD displays, press
the * («-) key or the # (^) key.
7.
Press the START key to store the value of the option.
8.
To change another option, perform steps 5 through 7.
9.
Press the REPORT key to print the Options Report.
10. Verify the options you set.
11. Press the STOP key and close the access panel.
3-12