Programming the dial directory – Xerox 7042 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Dial Directory
Delete all entries in a group key
Use the following procedure to delete all entries in a group:
1.
Open the access panel.
2.
Press the PROGRAM key.
3.
Press the PAUSE
/1
key twice to display GROUP DIAL.
4.
Close the access panel and press the START key. The
LCD prompts you to enter or to clear a group number:
GROUP DIAL
ENTER GR/CLEAR
5.
Press the CLEAR key. The LCD prompts you to enter the
group to cancel:
CLEAR GROUP
ENTER GROUP BUTTON
6.
Press the group key you want to clear. The LCD
displays:
CLEAR OK?
<>
GRn:ID name
7.
To verify the cancellation, press the START key. To
return to step 5 without clearing the group entry, press the
CLEAR key.
8.
Perform steps 5 through 7 for each group to clear.
9.
Press the STOP key. The machine goes to the standby
mode.
4-16