TeeJet Matrix Pro 840GS - Manual (Page 61)

55
98-05273-ENUS R4
HOME
OVER
VIE
W
SE
TUP
IMPLEMENT
FULL SCREEN
GPS
INTR
ODUC
TION
GUID
ANCE
DR
OPLE
T MONIT
OR
Programming Receiver
Program allows direct programming of the GPS receiver through a
command line interface. Only TeeJet support technicians should use
this feature. Use at your own risk!
1. Press
Start .
2. Adjust programming as required.
Figure 7-5: Programming Receiver
PRN
PRN selects the SBAS PRN that will provide GNSS differential
correction data.
1. Press DOWN arrow to access the list of options.
2. Select:
►Automatic – automatic PRN selection
►Number – contact your local dealer for the number associated
with your operating location
Figure 7-6: PRN
automatic
120
121
122
123
124
125
126
127
Alternate PRN
When PRN is not automatic, a second alternate SBAS PRN will
provide a second set of GNSS differential correction data.
1. Press DOWN arrow to access the list of options.
2. Select:
►None – no alternate PRN number
►Number – contact your local dealer for the number associated
with your operating location
Figure 7-7: Alternate PRN
none
120
121
122
123
124
125
126
127
PRN Not Shown
When GPS Type is set to "GPS+GLONASS", PRN options are not
available, nor shown on screen.
Figure 7-8: PRN